Industrial cooling towers are usually evaporative in my experience, smaller ones are large fans moving air over a stack of slats that the return water is sprayed or piped over and the collects in well for recirculation, larger ones afaik (like what you’d see at power plants) operate the same idea. Top ups and water chemistry is all automated.
Those systems have operation wide cooling loops that individual pieces of equipment tap into, some stuff uses it directly (see that with things like industrial furnaces) but smaller stuff or stuff that’s sensitive you’ll see heat exchangers and even then the server & PLC rooms were all air cooled, the air cons for them were all tied into the cooling water loops though.
From a maintenance POV though, way easier to air cool, totally seen motor drive racks with failed cooling fans that have had really powerful external blowers rigged up to keep them going to the next maintenance window. Yeah, industrial POV but similar idea.
It’d be coated, but it’s from processing, cold rolling metal generates a lot of heat, especially going that thin (thinnest I was around often was ~0.2mm), we’d often temper the material after processing, mainly for surface finish, mill rolls would be sprayed with lubricating coolant really close to what you’d see in use on a milling machine. This was with steel but same principle applies, pretty sure the lubricant we used is also labeled for use on aluminum mills, but you’d use food safe stuff for kitchen foil.